Cmp — dual compressor – Yamaha FX900 User Manual
Page 22
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
CMP — Dual Compressor
This is an extremely versatile compressor stage with independent left- and right-channel settings.
COMPRESSOR
COMPRESSOR
Lch THR RAT ATK
-20 1/» 5.0
Lch REL LVL
.20 -10
Lch LVL fLeft Channel Output Level: -°
q
. -30 — +6 dBl
Sets the left-channel output level of the CMP effect.
* The above parameters are all duplicated for the right
channel (Rch).
Rch THR RAT ATK
-20 l/oo 5.0
Rch REL LVL
.20
-10
Lch THR (Left Channel Threshold: -36 — 0 dB)
Sets the left-channel compressor threshold level. Refer to
page 19.
Lch RAT (Left Channel Ratio: 1/2.1/3.1/4.1/6.1/8.
This parameter sets the degree of left-channel compression.
Refer to page 19.
Lch ATK fLeft Channel Attack: 1.0 — 20 mS)
Determines how long it takes for left-channel compression to
begin after an input signal is detected. Refer to page 19.
Lch REL (Left Channel Release: 0.01 — 2.0 sec)
Determines how long it takes for left-channel compression to
be fully released after the input signal drops below the
threshold level. Refer to page 19.
21