Yamaha FX900 User Manual

Page 45

Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".

Advertising
background image

MIDI PGM CHANGE

When this function is called the LCD will appear as shown below, and it becomes possible to assign new memory location numbers
to each MIDI or FC900 program change number.

1

.

2

.

2,3

Use the [UTILITY] key to select the MIDI PGM CHANGE
display. The underline cursor should be under the PGM
parameter.

MIDI PGM CHANGE

PGM 1 = HEM UOl

Use the [DATA ENTRY] control or

[A]

and

[T]

keys to

select the program change number to which a new FX900
memory location number is to be assigned. The range of
available program change numbers is from 1 to 128.

3. Move the underline cursor to the MEM parameter by

pressing the [ ◄] key. Use the [DATA ENTRY] control or

[A]

and

[T]

keys to select the memory location number

containing the effect which is to be assigned to the
currently selected program change number. UOO through
U99 are the 100 USER memory locations, and POO

through P99 are the 100 PRESET memory locations.

NOTE: If this parameter is set to "MEM —", no program

change will occur when the corresponding
program change number is received. If this
parameter is set to "MEM —" by pressing the
[STORE] key while the cursor is located under
the "MEM" parameter, no program change will
occur when the corresponding program change
number is received.

4. Move the underline cursor back to the PGM parameter

by pressing the [ ◄] key and repeat the above steps to
assign as many program change numbers as
necessary.

NOTE: The program number/memory number

assignments made are stored in the BANK
selected in the preceding MIDI SETUP function.

To program the program change/memory

number assignments for a different BANK,
return to the MIDI SETUP display, select the

desired BANK, then program the required
assignments.

3,4

BANK

I

BANK: A ch= ?

PGM

1 =MEM ?

PGM

2 =MEM ?

PGM

3 =MEM ?






PGM 128 =MEM ?

1__ i L---------- —k--------

MIDI Receive Channel No.

I

BANKB

*— BANK C

:------- BANKD

Memory location numbers to be
recalled in response to each MIDI
program change number.

MIDI program change message number from
external MIDI device.

44

Advertising