360 Systems TCR Multi-Track - Manual (Page 124)

TCR Series User's Manual System Management 6-11
The Rename Directory prompt appears, as shown below:
RENAME DIRECTORY
ENTER NEW DIRECTORY NAME
¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯ ¯
ENTER = DONE
EXIT = CANCEL
EDIT IN = DELETE
EDIT OUT = INSERT
UNDO = UNDO CHANGES
Rename Directory Prompt
3. Enter the new directory name using the keypad.
Erase Directory
[Directory List, Select Directory] | MENU | Erase Directory
The Erase Directory function erases all unlocked files in any directory. The function is destructive
and there is no “undo” feature. Use the following steps to erase a directory:
1. In the directory that you want to erase, ensure that any files that you want to retain are locked.
To lock a file, access the directory’s File List, highlight each desired file and press LOCK.
The Lock Icon appears (
).
2. On the Directory List, highlight the directory that you want to erase and press MENU.
3. On the Directory menu, select ERASE DIRECTORY (item 2).
(DIRECTORY 1.2)
WARNING: ERASING THIS DIRECTORY WILL
PERMANENTLY REMOVE ITS UNLOCKED FILES
PRESS 'ENTER' TO ERASE
PRESS 'EXIT' TO CANCEL
Erase Directory Prompt
4. Press ENTER to erase or EXIT to cancel.
Copy Directory
[Directory List, Select Directory] | MENU | Copy Directory
The Copy Directory function allows you to copy all files or all marked files from one directory to
another in the same drive or in a different drive.