360 Systems TCR Multi-Track - Manual (Page 71)

TCR Series UserManual Operations 4-21
This behavior is shown in the illustration below.
EDIT-IN THRU EDIT-OUT
CurrentFile
Before Erase
CurrentFile
After Erase
0.00 0.00 0.00 Start of File 0.00 0.00 0.00 Head Point 0.00 0.00 0.00 Tail Point 0.00 0.00 0.00 End of File
0.00 0.00 0.00 Start of File
0.00 0.00 0.00 Head Point
Fade
01:00 02:00 03:00 04:00
01:00 02:00 03:00 04:00
File Timeline
The run time of a file can be reduced from the tail end of a file if these conditions are met.
1. The Tail Point of the file is between the Edit-In and Edit-Out points.
2. The Edit-Out point must be later on the timeline than the end of the audio in the file.
This behavior is shown in the illustration below.
EDIT-IN THRU EDIT-OUT
0.00 0.00 0.00 Tail Point
Fade
Current File
Before Erase
Current File
After Erase
01:00 02:00 03:00 04:00
01:00 02:00 03:00 04:00
File Timeline
End of File
Tail Point
Start of File Head Point End of File
Use the following steps to erase the Edit-In point through the Edit-Out point:
1. Open the desired file to access its Transport Screen.
2. Enter the Edit-In point and the Edit-Out point for the segment to be erased.
3. On the Transport Screen, press MENU.
4. On the Transport menu, select item 4, ERASE EDIT-IN THRU EDIT-OUT.