The copy menu will appear, as shown below, 24 operations tcr series usermanual, Copy menu (tcr8 display) – 360 Systems TCR Multi-Track User Manual
Page 74: Copy track menu (tcr8 display)
4-24 Operations
TCR Series UserManual
The Copy menu will appear, as shown below.
COPY EDIT-IN THRU EDIT-OUT
0.
COPY NOW
1.
TRACK 1
:
NO
2.
TRACK 2
:
NO
3.
TRACK 3
:
YES
4. >
TRACK 4
:
YES
5.
TRACK 5
:
NO
6.
TRACK 6
:
NO
7.
TRACK 7
:
NO
8.
TRACK 8
:
NO
9.
DEST FILE :
CLIPBOARD
'ENTER' OR NUMBER SELECTS MENU ITEM
Copy Menu (TCR8 Display)
5. To select the track(s) to be copied, use the Jog Wheel or the Arrow keys and then press
ENTER, or simply press the number of the desired track. The Copy Track Usage menu
appears for the selected track. This menu presents options for the selected track, such as a
straight 1:1 copy, a track bounce, or “don’t copy.” Note that the TCR4’s Copy Track Usage
menu lists tracks 1 - 4 as the destinations.
TRACK 3 USAGE FOR COPY
0.
DON'T COPY TRACK 3
1.
COPY TRACK 3 TO TRACK 1
2.
COPY TRACK 3 TO TRACK 2
3. >
COPY TRACK 3 TO TRACK 3
4.
COPY TRACK 3 TO TRACK 4
5.
COPY TRACK 3 TO TRACK 5
6.
COPY TRACK 3 TO TRACK 6
7.
COPY TRACK 3 TO TRACK 7
8.
COPY TRACK 3 TO TRACK 8
PRESS NUMBER TO CHANGE SETTING
Copy Track Menu (TCR8 Display)
6. To select the copy option for the selected track, and press the number of the desired option on
the keypad. The system will return to the Copy menu.
7. Repeat steps 5 and 6 for each track to be copied.
8. Select the destination file for the copy function:
•
If the default file (CLIPBOARD) is acceptable, no action is required. Note that this
file is overwritten each time a copy or cut (to clipboard) is performed.
•
To create a new (unique) file as the destination, select item 9, DEST FILE. The
Enter Destination File Name menu will appear. Enter the file name in the normal
manner and press ENTER. If the file already exists, an alert will appear with the
option of continuing (using the existing file) or choosing another file name.
9. When all desired tracks are enabled or disabled, press 0 to perform the copy function. During
the copy operation, the EXIT button can be used to cancel the copy. If the copy function is
canceled, the destination file will be returned to the previous state.