360 Systems TCR Multi-Track - Manual (Page 73)

TCR Series UserManual Operations 4-23
The start of file, Head point and Edit-In point will be set to the start of the silence that was copied as
shown in the illustration below.
EDIT-IN THRU EDIT-OUT
Current File
Destination File
0.00 0.00 0.00 End of File
0.00 0.00 0.00 End of File
0.00 0.00 0.00 Tail Point
0.00 0.00 0.00 Start of File
0.00 0.00 0.00 Head Point
Fade Fade
0.00 0.00 0.00 Head Point 0.00 0.00 0.00 Start of File 0.00 0.00 0.00 Tail Point
01:00 02:00 03:00 04:00
01:00 02:00 03:00 04:00
File Timeline
If the Edit-Out point is set later on the timeline than the end of the audio in the file, silence will be
copied to the destination file until the Edit-Out point is reached. The end of file, Tail point and Edit-
Out point will be set to the end of the silence as shown in the illustration below.
EDIT-IN THRU EDIT-OUT
Current File
Destination File
Fade Fade
0.00 0.00 0.00 Head Point
0.00 0.00 0.00 End of File
0.00 0.00 0.00 Tail Point
0.00 0.00 0.00 Start of File 0.00 0.00 0.00 Head Point 0.00 0.00 0.00 Tail Point 0.00 0.00 0.00 End of File
01:00 02:00 03:00 04:00
01:00 02:00 03:00 04:00
File Timeline
Start of File
Use the following steps to copy the Edit-In point through Edit-Out point.
1. Open the desired file to access its Transport Screen.
2. Enter the Edit-In point and the Edit-Out point for the segment to be copied.
3. On the Transport Screen, press MENU.
4. On the Transport menu, select item 5, COPY EDIT-IN THRU EDIT-OUT.