360 Systems TCR Multi-Track - Manual (Page 88)

5-4 Error! No text of specified style in document. TCR Series User's Guide
7. Default Time
Selects the start time of newly created files. Choose a Fixed Time, or get the start time from
the Internal Generator or from Incoming Time Code.
8. Default Tracks
Selects which tracks to arm for newly created files
9. Default Title
Chooses the default name of newly created files. The system automatically appends the file’s
index number to this name.
*. More Preferences
Displays a second page of system preferences. The following items reside on the More
Preferences Menu.
0. Typed Time Values
Determines the resolution for typed time values — whether to include frames, sub-frames in
addition to hours, minutes and seconds
1. Rewind/FF Speed
Sets the fast transport speed limit (1x to 60x).
2. Prompt on Exit
Selects whether to prompt the user before closing an open file.
3. Screen Saver Off
Selects when to prevent the LCD Screen from going blank (after one hour without button
presses). Choose During Play and Record or During Record Only.
Each “preference” function is explained in more detail the following sections.
Crossfade
MENU | Machine Setup | Preferences | Crossfade
The Crossfade function sets the crossfade interval that is used each time the TCR enters and exits the
record and erase modes — either with a manual record, an auto-record, or a punch-in / punch-out with
the ARM buttons.
Use the following steps to set the crossfade interval.
1. On the Setup Preferences Menu, select item 0 (CROSSFADE). The current crossfade
interval is highlighted.
2. Select the desired crossfade interval. The range is from 1 MS (millisecond) to 30 seconds.