360 Systems TCR Multi-Track - Manual (Page 132)

TCR Series User's Manual System Management 6-19
The Mark Files prompt appears.
MARK FILES
PRESS 'MARK' TO MARK/UNMARK FILE
PRESS 'ENTER' TO MARK ALL FILES
PRESS 'CLEAR' TO UNMARK ALL FILES
PRESS 'EXIT' TO CANCEL
Mark Files Prompt
5. Select the desired mark/unmark action.
Installing TCR Program Updates
TCR hardware includes programmable logic, microprocessors and Digital Signal Processors. The
programming instructions for each of these elements is stored in non-volatile FLASH memory. It is
possible to update any or all of these components by installing a TCR program disk in the Zip drive
and either turning on the power or holding STOP and pressing FILES while the DRIVE LIST is
displayed. If the installed Zip disk contains a program update, a prompt is displayed to allow loading
of the update or continuing without loading. Program updates can be transferred via email,
"unzipped" and placed in the root directory of a DOS formatted Zip disk and then installed in TCR.