360 Systems TCR Multi-Track - Manual (Page 41)

TCR Series User's Manual Overview 2-25
In the upper right corner of the display, two words appear to label the current Display Mode. The six
possible labels are:
• OFFSET REG (Offset Register)
• REL (Relative)
• OFFSET POSN (File Position - Offset)
• FILE POSN (File Position)
•
GEN (Internal Time Code Generator)
•
EXT TC (External Time Code)
One of these Display modes may be selected with the DISP button, and the associated Display Mode
Menu.
Below the Time Code Register, the title bar lists the name of the file that has been opened.
The center of the display lists seven parameters for the selected file:
• EDIT IN — The edit in-point is the time code at which the edit will begin during an auto-
record.
• EDIT OUT — The edit out-point is the time code at which the edit will end during an auto-
record.
•
OFFSET — this field displays a time offset that affects all tracks.
•
FRAME RATE — this field displays the current frame rate.
•
SAMPLE RATE — this field displays the current audio sample rate.
• SYNC INPUT — this field indicates whether the TCR is running on internal or external
reference.
• TC SOURCE — this field displays the current time code source.
At the bottom of the display, the Time Left field indicates the recording time remaining on the current
drive, based on the number of machine tracks.
At the bottom of the display, the Speed field indicates the file’s current playback speed.