360 Systems TCR Multi-Track - Manual (Page 83)

TCR Series UserManual Operations 4-33
This menu presents options, such as a straight 1:1 insert, a track bounce, or “don’t insert.”
Note that the TCR4’s Insert Track Usage menu lists tracks 1 - 4.
TRACK 3 USAGE FOR INSERT
0. DON'T INSERT ON TRACK 3
1. INSERT ON TRACK 3 FROM TRACK 1
2. INSERT ON TRACK 3 FROM TRACK 2
3. > INSERT ON TRACK 3 FROM TRACK 3
4. INSERT ON TRACK 3 FROM TRACK 4
5. INSERT ON TRACK 3 FROM TRACK 5
6. INSERT ON TRACK 3 FROM TRACK 6
7. INSERT ON TRACK 3 FROM TRACK 7
8. INSERT ON TRACK 3 FROM TRACK 8
PRESS NUMBER TO CHANGE SETTING
Insert Track Menu (TCR8 Display)
7. To choose an insert option for the selected track, press the number of the desired option on
the keypad. The system will return to the Insert menu.
8. Repeat steps 6 and 7 for each track that to be inserted.
9. Select the source file for the insert function:
•
If the default file (CLIPBOARD) is acceptable, no action is required.
•
To insert from a named file other than the clipboard, select item 9, SOURCE FILE.
The Choose File To Insert menu will appear. Use the Jog Wheel or Arrow keys to
select the desired file, then press ENTER. The selected file name will appear in the
Insert menu.
10. When all desired tracks are enabled or disabled, press 0 to perform the Insert function.
During the Insert function the EXIT button can be pressed to cancel. If the insert function is
canceled, the current file will be returned to the previous state.
11. At the conclusion of the process, an “OPERATION COMPLETE” message will appear, and
the UNDO button lights. Press ENTER to return to the Transport Screen.
12. To undo the procedure and revert to the previous state of the file, press UNDO.