360 Systems TCR Multi-Track - Manual (Page 138)

TCR Series User's Manual Appendix B. Maintenance 8-3
3. Select item 1, AUDIO I/O to display the Setup Audio I/O Menu.
SETUP AUDIO I/O
0. TRACK INPUT 1-2 : ANALOG 1-2
1. TRACK INPUT 3-4 : ANALOG 3-4
2. TRACK INPUT 5-6 : ANALOG 5-6
3. TRACK INPUT 7-8 : ANALOG 7-8
4. AUXILIARY INPUT : AES 1-2 DIRECT
5. MON ARMED TRACKS : WHEN RECORDING
6. OUTPUT WORD SIZE : 24 BITS
7. HEADROOM : 20 DB
8. > CALIBRATE OUTPUTS
9. CALIBRATE INPUTS
*. SET PROCESS DELAYS
Setup Audio I/O Menu (as shown for the TCR8)
4. Choose the CALIBRATE OUTPUTS item:
•
(TCR4) Select item 6.
•
(TCR8) Select item 8.
The Calibrate Analog Output Levels Menu appears.
CALIBRATE ANALOG OUTPUT LEVELS
0. > RESET ALL
1. TRACK 1 OUTPUT TRIM : -2.60%
2. TRACK 2 OUTPUT TRIM : -3.00%
3. TRACK 3 OUTPUT TRIM : -2.55%
4. TRACK 4 OUTPUT TRIM : -3.10%
5. TRACK 5 OUTPUT TRIM : -1.18%
6. TRACK 6 OUTPUT TRIM : -1.21%
7. TRACK 7 OUTPUT TRIM : -0.97%
8. TRACK 8 OUTPUT TRIM : -2.05%
9. TONE OUTPUT : ONE TRACK
'ENTER' OR NUMBER SELECTS MENU ITEM
Calibrate Analog Output Levels Menu (as shown for the TCR8)
5. Select item 0, RESET ALL, to reset the current output gain trim settings for all outputs. A
prompt appears requesting that all output gain trim settings should be reset.
Note Resetting the output gain trim settings is not required.
6. Choose whether or not the test tone should be routed to all analog outputs — or only to the
analog output for the selected track:
•
(TCR4) Select item 5.
•
(TCR8) Select item 9.
Use the Arrows or the Jog Wheel to change the setting. Press ENTER to accept. The
TCR will now play an internally generated 1 kHz tone at +4.00 dBu to the selected output(s).