360 Systems TCR Multi-Track User Manual
Page 79
TCR Series UserManual
Operations 4-29
If the audio at the Tail point of the current file is overwritten by the Paste operation, then the Tail
point of the current file will be moved to the end of the audio in the current file. This is shown in the
illustration below.
Current File
Before Paste
Current File
After Paste
Source File
Fade
Fade
0.00
0.00
0.00
Head Point
0.00
0.00
0.00
Tail Point
0.00
0.00
0.00
Start of File
0.00
0.00
0.00
End of File
EDIT-IN
0.00
0.00
0.00
End of File
0.00
0.00
0.00
Tail Point
0.00
0.00
0.00
Head Point
EDIT-IN THRU EDIT-OUT
01:00
02:00
03:00
04:00
File Timeline
03:00
04:00
05:00
06:00
0.00
0.00
0.00
Tail Point
03:00
04:00
05:00
06:00
Use the following steps to paste a segment at the in-point.
1. Ensure that the desired source file exists.
2. Open the desired file to access its Transport Screen.
3. Enter the desired Edit-In point — the location where the paste will be made.
4. On the Transport Screen, press MENU.
5. On the Transport menu, select item 7, PASTE AT EDIT-IN. The Paste menu will appear
as shown below.
PASTE AT EDIT-IN
0.
PASTE NOW
1.
TRACK 1
:
NO
2.
TRACK 2
:
NO
3.
TRACK 3
:
YES
4. >
TRACK 4
:
YES
5.
TRACK 5
:
NO
6.
TRACK 6
:
NO
7.
TRACK 7
:
NO
8.
TRACK 8
:
NO
9.
SOURCE FILE
:
CLIPBOARD
'ENTER' OR NUMBER SELECTS MENU ITEM
Paste Menu (TCR8 Display)
6. To select the track(s) to be pasted, use the Jog Wheel or Arrow keys, and press ENTER; or
simply press the number of the desired track.