360 Systems TCR Multi-Track - Manual (Page 98)

5-14 Error! No text of specified style in document. TCR Series User's Guide
Calibrate Outputs
MENU | Machine Setup | Audio I/O | Calibrate Outputs
The Calibrate Outputs function allows you to calibrate the TCR’s analog output signal path to
ensure that proper signal levels are recorded and reproduced.
In Appendix B, “Maintenance,” refer to the “Output Calibration” section for complete instructions.
Calibrate Inputs
MENU | Machine Setup | Audio I/O | Calibrate Inputs
The Calibrate Inputs function allows you to calibrate the TCR’s analog input signal path to ensure
that proper signal levels are recorded and reproduced.
In Appendix B, “Maintenance,” refer to the “Input Calibration” section for complete instructions.
Set Process Delays
MENU | Machine Setup | Audio I/O | Set Process Delays
The Set Process Delays function allows you to add delay to specific sets of inputs in order to
compensate for delays generated by external audio processing equipment.
Use the following steps to set process delays:
1. On the Setup Audio I/O Menu, select the SET PROCESS DELAYS function. The Set
External Process Delays Menu appears.
Note that the TCR4’s Set External Process Delays Menu lists tracks 1 - 4 only.
SET EXTERNAL PROCESS DELAYS
0. > CLEAR ALL DELAYS
1. TRACKS 1-2 : 000 SAMPLES
2. TRACKS 3-4 : 000 SAMPLES
3. TRACKS 5-6 : 000 SAMPLES
4. TRACKS 7-8 : 000 SAMPLES
'ENTER' OR NUMBER SELECTS MENU ITEM
PRESS 'EXIT' TO EXIT MENU
Set External Process Delays Menu (as shown for the TCR8)
2. Select the desired delay function — either “clear” all delays (item 0), or “set” delays. If you
choose to set delays, the Track [n] Process Delay Prompt appears.
•
Select the digit that you wish to change, and then enter the desired number of
samples.
•
With all desired digits entered, press ENTER to accept the new value.
3. Press ENTER to accept the new setting.
4. Repeat steps 2 and 3 for all desired tracks.