360 Systems TCR Multi-Track - Manual (Page 37)

TCR Series User's Manual Overview 2-21
Introduction to the Directory List
Each TCR disk drive has ten directories, numbered 0 through 9. Directories are presented in the
DIRECTORY LIST with their index, followed by their name and an information field.
DIRS ON: (HARD DRIVE 1)
0. (DIRECTORY 1.0) 2 FILES
1. (DIRECTORY 1.1) 10 FILES
2. (DIRECTORY 1.2) 9 FILES
3. (DIRECTORY 1.3) 8 FILES
4. (DIRECTORY 1.4) 5 FILES
5. (DIRECTORY 1.5) 2 FILES
6. (DIRECTORY 1.6) 0 FILES
7. (DIRECTORY 1.7) 0 FILES
8. (DIRECTORY 1.8) 0 FILES
9. (DIRECTORY 1.9) 0 FILES
'ENTER' OR NUMBER OPENS DIRECTORY
Directory List
•
The title bar at the top indicates which drive the Directory List is associated with.
•
The first two columns list each directory’s logical number and current name. Either the
default name (1.1, 1.2, etc.) or a custom user name will be shown.
•
The right column can list the directory’s total size, the total number of files, or the total run
time.
About the Directory Menu
The Directory Menu contains of a list of operations that can be performed on the selected directory.
The title bar at the top shows the name of the selected directory.
The Menu provides tools used to assign a unique Directory name, to copy the Directory to another
location, or to erase the Directory’s contents.
DIR MENU: (DIRECTORY 1.1)
0. MACHINE SETUP
1. > RENAME DIRECTORY
2. ERASE DIRECTORY
3. COPY DIRECTORY
'ENTER' OR NUMBER SELECTS MENU ITEM
PRESS 'EXIT' TO EXIT MENU
Directory Menu