360 Systems TCR Multi-Track - Manual (Page 94)

5-10 Error! No text of specified style in document. TCR Series User's Guide
The Prompt on Exit function allows you to set whether or not a “prompt” menu appears each time
you exit the Transport Screen. When Prompt on Exit is enabled, the Close File and Quit Prompt
appears.
CLOSE FILE AND QUIT
PRESS 'ENTER' TO CLOSE FILE AND QUIT
PRESS 'EXIT' TO CANCEL
Close File and Quit Prompt
When the function is disabled, you can exit the Transport Screen without the prompt menu appearing.
Use the following steps to set the Prompt on Exit function.
1. On the Setup Preferences Menu, select item * (MORE PREFERENCES).
2. On the Setup More Preferences Menu, select item 2 (PROMPT ON EXIT). The current
setting is highlighted.
3. Select either YES (prompt menu enabled, or NO (prompt menu disabled).
Screen Saver Off
MENU | Machine Setup | Preferences | * | Screen Saver Off
The Screen Saver Off function allows you to set the specific mode when the screen saver will not
engage.
Use the following steps to set the screen saver mode.
1. On the Setup Preferences Menu, select item * (MORE PREFERENCES).
2. On the Setup More Preferences Menu, select item 3 (SCREEN SAVER OFF). The
current setting is highlighted.
3. Select the desired screen saver mode. Two choices are available:
•
DURING PLAY/REC: the screen saver will not engage during either the play mode
or the record mode.
• DURING RECORD: the screen saver will not engage during the record mode only.
Note that in all other “idle” modes, the screen goes blank after one hour without button presses.