Cub Cadet RZT-S Zero Electric - Manual (Page 7)

Introduction
3
Assembly
Torque specifications may be noted in the part of the text that covers assembly. They may also be summarized in
tables along with special instructions regarding locking or lubrication. Whichever method is more appropriate will be
used. In some cases, both will be used so that the manual is handy as a quick-reference guide as well as a step-by-
step procedure guide that does not require the user to hunt for information.
The level of assembly instructions provided will be determined by the complexity of disassembly/reassembly, and
by the potential for unsafe conditions to arise from mistakes made in assembly.
Some instructions may refer to other parts of the manual for subsidiary procedures. This avoids repeating the
same procedure two or three times in the manual.
Description of the RZT-S Zero
The RZT-S Zero is a 48 volt electric zero turn mower
that is based on Cub Cadet’s RZT-S mower platform.
There are four electric motors that are used on these rid-
ers:
• One motor connected to each rear wheel through
a drop axle.
• Two motors on the deck, one for each blade.
The RZT-S Zero also features:
• The only electric zero-turn rider with four-wheel
steering and steering wheel control
• Extreme level of quietness:
* 70% quieter than a standard gasoline rider.
• Unsurpassed results of the cub cadet signature
cut™:
* Designed by aerospace engineers. System
components and deck design have been opti-
mized for flawless performance, low mainte-
nance and professional quality cut
• Lower operating cost per use:
* Never have to purchase gasoline, oil, filters or
belts.
• Better for users and the environment:
* Zero emissions, reduced noise, zero gasoline
smell/fumes/spills
Figure 1.1