Entering the mail server name from the front panel, Fig. 299: configuration menu/selecting setup, Fig. 300: setup menu/selecting ethernet – Hardy HI 3010 Filler/Dispenser Controller User Manual
Page 103: Fig. 301: ethernet sub-menu
89
FIG. 298: E-MAIL CONFIGURATION WEB PAGE
Step 4. Click in the text field next to “Mail Server” and
enter either the Mail Server name or the Mail
Server IP Address.
Entering the Mail Server Name from the Front Panel
Step 1. If you enter a name for the Mail Server you need to
first enter the DNS Server Address from the front
panel of the HI 3000 Series Instrument as follows:
•
From the Front panel of the HI 3000 Series
Instrument press the Setup/3 button. The Con-
figuration Menu appears. (See Fig. 299)
FIG. 299: CONFIGURATION MENU/SELECTING
SETUP
•
Press the down arrow button until the cursor is
in front of SETUP.
•
Press the Enter button. The Setup Menu
appears. Press the up arrow button until the
cursor is in front of Ethernet. (See Fig. 300)
FIG. 300: SETUP MENU/SELECTING ETHERNET
•
Press the Enter button. The Ethernet sub-menu
appears. (See Fig. 301)
FIG. 301: ETHERNET SUB-MENU
•
Press the Down Arrow button until the cursor
is in front of DNS. (See Fig. 301)
•
Press the Clr button to clear the entry. Use the
alphanumeric keypad to enter the DNS Server
IP Address. If you do not know the IP Address,
contact your Network Administrator for the IP
Address.
NOTE:
The IP Address consists of 4 octets with a period
between each octet. Make sure you enter the peri-
ods between each octet (set of numbers).
•
Press the Enter Button to set the entry.
•
Press the Exit button until you return to the
Main Menu.
•
The DNS Address is set.
Step 2. Enter the Mail Server IP Address.
Step 3. If you are sending E-mail outside your local area
network (segment) you need to get the following
three IP addresses from the Network Administrator
and do the following:
5.
Instrument IP Address
6.
DNS IP Address
7.
Gateway IP Address
NOTE:
You must enter these IP Addresses whether you
are using a Mail Server name or IP Address.
CONFIGURATION MENU
ADJ UST SETPOINTS - >
SETUP - >
CALIBRATION - >
>
>
SETUP MENU
Set Cl ock - >
Devicenet - >
Ether net - >
>
ETHERNET
Gate 192.168.110.1
DNS 192.168.100.1
DHCP 10.10.10.40