Hardy HI 3010 Filler/Dispenser Controller - Manual (Page 51)

37 Network
Installation
FIG. 94: NETWORK DIALOG BOX/SELECT
PROPERTIES
FIG. 95: TCI/IP PROPERTIES/IP ADDRESS
Step 11. Click on OK.
Step 12. Open up your browser.
Step 13. In the Address field in the Browser, type in the IP
Address for the instrument you are connected to.
Step 14. The Product Home Page appears.
Step 15. If the Product Home Page does not appear.
Step 16. Click on Start.
Step 17. Click on Settings.
Step 18. Click on the Internet Options Icon. The Internet
Explorer Properties dialog box appears. (See Fig.
96)
Step 19. Make sure that the Never dial a connection is
checked.
Step 20. Click on OK.
Step 21. Type in the IP address of the HI 3000 series instru-
ment you are connected to and the Product Home
page appears.
FIG. 96: INTERNET PROPERTIES DIALOG BOX
Hardy Control-Link Ethernet Network
FIG. 97: HARDY CONTROL-LINK ETHERNET
NETWORK
Materials Required
• 3, 4, 5, 8 Port Hub (Depends on how many
devices you are going to connect to the
hub.
• 10/100 Base T Ethernet Card for the PC.