Hardy HI 3010 Filler/Dispenser Controller - Manual (Page 67)

53 Network
Installation
Step 2. Push the up or down arrows until the cursor is next
to “OPTIONS”. (See Fig. 151)
FIG. 151: CONFIGURATION MENU/SELECTING
OPTIONS
Step 3. Press the Enter button. The Options submenu
appears with Remote I/O selected. (See Fig. 198)
Step 4. If the cursor is not in front of Profibus I/O, push the
up arrow until the cursor is aligned with Profibus I/
O.
Step 5. Press the Enter button. The Profibus I/O Menu
appears. (See Fig. 153)
FIG. 152: OPTIONS/SELECTING PROFIBUS I/0
FIG. 153: PROFIBUS I/0 MENU/SELECTING THE
NODE ADDRESS
Step 6. Press the left or right arrow buttons to select the
node address of this instrument or enter the address.
Step 7. Press the Enter button to set the entry.
Step 8. Press the down arrow button until the cursor is in
front of Output Size. The Output and Input Sizes
have a range from 0 to 122 words. The combined
Output and Input Sizes cannot exceed 208 words.
Step 9. Press the left or right arrows to increase or decrease
the Output Size or enter the value.
NOTE: The HI 3000 Series Input and Output Sizes are
expressed in words. Many of the Profibus Net-
work Management software Input and Output
Sizes are expressed in bytes. Make sure that the
Input/Output selection matches the Input and
Output Sizes of the HI 3000 Series Instruments.
Step 10. Press the Enter button to set the entry.
Step 11. Press the down arrow button until the cursor is in
front of Input Size.
Step 12. Press the left or right arrows to increase or decrease
the Input Size or enter the value.
Step 13. Press the Enter button to set the entry.
Step 14. Press the Exit button until the Main Menu appears.
Step 15. Cycle the power.
Selecting the Profibus Node Address from the Web
Page
From the Home page of the HI 3000 Instrument, click on
Configuration. (See Fig. 154) The Configuration Page
appears. (See Fig. 155)
FIG. 154: SELECTING CONFIGURATION FROM
THE HOME PAGE OF THE HI 3000 INSTRUMENT
FIG. 155: CONFIGURATION PAGE/SELECTING
OPTIONS
>
OPTIONS
Remot e I/ O OFF - >
Cont r ol Net I/ O OFF - >
PROFIBUS I/ O ON - >
>
PROFIBUS I/ O
Node Addr ess 1
Output Size 64w
Input Size 64w