Hardy HI 3010 Filler/Dispenser Controller - Manual (Page 86)

HI-3000 Series 72
Operation and Installation
FIG. 227: UNSOLICITED MESSAGE DEFINITION/
RECEIVED PAGE
Step 7. Click in the text field and enter the following infor-
mation: (See Fig. 227)
• On the Information CD that you received
with your instrument, you should have two
(2) OPC DPD files. Make sure that you
have copied these DPD files into the Des-
cartes Omniserver folder as described
above. If you don’t see the information in
the text field download the files from the
Web Site Download section. See down-
loading instructions from the Configura-
tion of Host Message above.
• If you do not have access to the Web Site
Download or the CD then copy the infor-
mation below into the Received Message
text field. (See Fig. 278)
{0:2UB}
{FI00:4RB}{FI02:4RB}{FI04:4RB}{FI06:4RB}{FI08:4R
B}{FI10:4RB}{FI12:4RB}{FI14:4RB}{FI16:4RB}{FI18:4
RB}{FI20:4RB}{FI22:4RB}{FI24:4RB}{FI26:4RB}{FI28:
4RB}{FI30:4RB}{FI32:4RB}{FI34:4RB}{FI36:4RB}{FI3
8:4RB}{FI40:4RB}{FI42:4RB}{FI44:4RB}{FI46:4RB}{FI
48:4RB}{FI50:4RB}{FI52:4RB}{FI54:4RB}{FI56:4RB}{
FI58:4RB}{FI60:4RB}{FI62:4RB}{SeqNumIn:4UB}
FIG. 228: UNSOLICITED MESSAGE DEFINITION/
RECEIVED MESSAGE
Step 8. Click on the OK button to save the configuration.
(See Fig. 228)
Setting Up OPC Communication with a Client
About OPC Clients
There are several versions of OPC Clients on the market
today. We can’t possibly provide instructions for every client
however the setup is pretty much the same. We have selected
Wonderware
®
for our tutorial. Wonderware
®
is the most
popular Factory Suite software currently on the market. If
you are looking for another OPC Client, we recommend
going to the OPC Foundation Web Site and checking their
list of certified products. In addition, on the OPC Foundation
Site there is ample information about the OPC protocol to
answer any questions you may have that are beyond the
scope of this manual.
NOTE: Wonderware
®
is a registered trademark of the
Naiveness Corporation.
Step 1. If you haven’t installed Wonderware InTouch,
install it now.
NOTE: Windows
®
2000, Service Pak 3 or Windows
®
XP
Service Pak 1 are required. Windows
®
is a regis-
tered trademark of the Microsoft Corporation.
Step 2. Start the OPC Server (Omniserver™) from your PC
desktop. The OPC Server must be running when
configuring Wonderware.