Hardy HI 2151/30WC Single-Scale Controller - Manual (Page 30)

HI 2151 SERIES WEIGHT CONTROLLERS REMOTE I/O OPTION
5-10
TABLE 5-11: BLOCK READ COMMAND NUMBER 8: CONFIGURATION OF ANALOG OUTPUT
Block Read
Command Number
9: Configuration of
Standard RS232
Port (HI 2151/20WC
Only) HI 2151/20WC Only.
Weight value represented by a zero scale analog output: 2 1
Weight value represented by a full scale analog output: 2 3
TOTAL NUMBER OF WORDS 5
BLOCK READ COMMAND NUMBER 8: Configuration of Analog Output
START
WORD DEFINITIONS: #WORDS WORD
BLOCK READ COMMAND NUMBER 9: Configuration of Standard RS232 Port
START
WORD DEFINITIONS: #WORDS WORD
Command number: A value of 9 (decimal)
bit 0 1
bit 1 0
bit 2 0
bit 3 1
bit 4 0
bit 5 0
bit 6 0
bit 7 0
bits 8 - 15 Reserved for future use
1 0
Format of Communication:
bit 0 Print initiation (If configured as printer. 1 = print button
0 = continuous. If configured as bi-directional: 0 = print button,
1 = altered print).
bit 1 Setpoint, Deadbands, and Preact values transmitted
bit 2 Rate-of-Change transmitted
bit 3 Tare weight transmitted
bit 4 Net weight transmitted
bit 5 Gross weight transmitted
bit 6 Reserved for future use
bit 7 Reserved for future use
bits 8 - 15 Reserved for future use
1 1
Port Configuration
bits 0 - 7 A value of 0 or 1 [0=Bi-Directional, 1 = Printer (output) only]
Baud Rate
bits 8 - 15 A value of 0 to 5 (0 = 600, 1 = 1200, 2 = 2400, 3 = 4800,
4 = 9600, 5 = 19200)
1 2
Parity
bits 0 - 7 A value of 0 to 2 (0=None, 1 = 1 = Even, 2 = Odd)*
Stop Bits
bits 8 - 15 A value of 0 or 1 (0=one stop bit, 1 = two stop bits)*
*Note: Parameters are not used in the HI 2151/30WC
1 3