Industrial Data Systems IDS 410 User Manual
Page 32
IDS 410/422 User's Manual
31
Parameter 25: Serial Port 2 Mode (4 [8 data bits, no parity] )
Enter the mode number from the table below to select the mode parameter in the mode
description column.
Mode Number
Mode Description
1
7 data bits, no parity
2
7 data bits, even parity
3
7 data bits, odd parity
4
8 data bits, no parity
5
8 data bits, even parity
6
8 data bits, odd parity
Parameter 26: Serial Port 2 Baud Rate (1 [9600 baud])
Enter the baud number from the table below to select baud rate in the baud description
column.
1
9600 Baud
2
4800 Baud
3
2400 Baud
4
1200 Baud
5
600 Baud
6
300 (19.2k Baud *HS)
7
150 (38.4k Baud *HS)
Parameter 27: TX2 Control / Station ID (255 [single station])
Serial Port 2 can be used for continuous transmission of scale data or as a network buss or
for single station remote control.
• Enter a 0 to enable continuous transmission of data (parameter 28).
• Enter a station ID (1 to 254) for network buss configuration.
• Enter 255 for single station remote control.
*High Speed version only.