Controls and their functions front panel, O [pad] key (input channels a...d), Controls and their functions – KORG Soundlink DRS REcording Console 168RC User Manual
Page 10
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
2. Controls and their functions
2.
Controls and their functions
Front panel
O [PAD] key (INPUT channels A...D)
These switches attenuate the input signal of INPUT channels A~D. When the pad is on (switch
pressed in), the input signal will be attenuated by 20 dB. Normally, you will turn this on for line
input, and off for mic input.
o
[TRIM] knob (INPUT channels A...0, LINE IN channels E...H)
These adjust the input levels of INPUT channels A~D and LINE IN channels E~H.
Use [PAD] and [TRIM] to set an appropriate input level. As a general rule, adjust [PAD] and
[TRIM] so that the Ch Meter (channel meter) is in the -18—12 dB range when the fader Q is at the
0 dB position.
When an overload occurs, an "O" will appear in the upper right of the LCD (p.l2). Please be aware
that distortion caused by excessive input gain to the analog circuitry cannot be corrected by the
faders.
The PAD and TRIM settings and the phantom power switch settings are not memorized as part of
a program.