KORG Soundlink DRS REcording Console 168RC - Manual (Page 65)

Chapter 4. Effects
16: Pitch Shift Mod. (Pitch Shift Modulation)
This effect uses an LFO to modulate the pitch shift amount of detuning. The effect sound and the
direct sound can be panned to left and right to produce a clear spaciousness. It is especially effec­
tive to output the sound from stereo speakers, since the effect sound and the direct sound will be
mixed in the air.
Output Output
W/D LEVL
SHFT -50...+50 cent Set the pitch difference relative to the input signal.
If 0 WAVE Triangle, Square Select the LFO waveform.
LfOFREQ 0.02...15.00 Hz Set the LFO speed.
DPTH -50...+50 Set the depth of LFO modulation for the pitch shifter.
Original Pitch •
Pitch Shift Mod - Pitch Shift / Depth
/ i LFO Waveform=Triangie
f Depth (+vaiue)
Pitch Shift (+ value)
T LFO Waveform=Square
Depth (-value)
OutputW/D 0...100 Set the balance between the effect sound and the direct
sound. As this setting is increased, the effect sound will
become louder. With a setting of 100, the effect sound and
direct sound will be output with a balance of 1:1.
Output PAN L50...101, CNT, R01...R50 Set the left/right position of the effect sound and the di­
rect sound. Settings of "L" place the effect sound at left
and the direct sound at right. If Output W/D is at 0, pan
will have no effect.
Output LEVI 0...100 Set the output level.
58