Bi phase mod. (bi phase modulation) – KORG Soundlink DRS REcording Console 168RC User Manual
Page 61
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chapter 4. Effects
12: Bi Phase Mod. (Bi Phase Modulation)
This is a chorus which uses a waveform that is the sum of two different LFOs. The frequency and
depth can be set independently for each of these two LFOs, allowing extremely complex wave
forms to be created by the combination. This makes it possible to produce "analog-like" modula
tion sounds that have an unstable feeling.
Chorus/Flanger -
( LF01 WAVE )..................
( LF02WAVE )...................
-
0
-—>
High Damp
Output
LEVL
-
0
^
^
Output
PAN
-
0
-
Output
LEVL
LFOs WAVE
T/T,T/S,S/T,S/S
Select the waveforms for LFOl and 2. (T: Triangle, S: Sine)
LF01 FREQ
0.02...15.0HZ
Set the speed of LFOl.
LFOl DEPTH
0...100
Set the modulation depth of LFOl.
LF02 FREQ
0.02...15.0HZ
Set the speed of LF02.
LF02 DEPTH
0...100
Set the modulation depth of LF02.
DLAY
0.0...50.0 mS
Set the delay time after the direct sound.
FBAK
■ 100...+100
Set the amount of feedback for the chorus block. Raising
the feedback allows this effect to be used as a flanger.
DAMP
0
...
100
%
Set the
Output PAN
L50...L01,CNT, R01...R50 Set the
Output LEVL
0...100
Set the
54