KORG Soundlink DRS REcording Console 168RC - Manual (Page 88)

7 .
168RC MIDI specifications
System Exclusive messages
FO: Exclusive header F7: End of Exclusive ALL EQ MEMORY NAME DUMP
Universal System Exclusive Request [FO,42,3n,3D,1C,04,F7]
DEVICE INQUIRY Reply [F0,42,3n,3D,4C,04,DATA *,............ F7]
Recjuest [FO, 7E,xx, 06,01, F7] DATA *: SEE ATTACHED CHARTS.
xxtDevice ID channel 0-F or 7F
Reply [FO,7E,Ox,06,02,42,3D,00,00,00,aa,00,bb,OO.F7] ALL EFFECT MEMORY NAME DUMP
X:Device ID channel Request [FO,42,3n,3D,1C,05,F7]
aa:Minor Software version Reply [F0,42,3n,3D,4C,05,DATA *............ F7]
bb:Major Software version DATA *: SEE ATTACHED CHARTS.
System Exclusive PROGRAM WRITE REQUEST
Common Header: [FO,42,3n,3D,] Request [FO,42,3n,3D,11,0b,pp,F7]
42:KORG ID n:Device ID 3D:168RC ID b: 0=Program, 1=EQ Memory*, 2=Effect Memory*
DATA *: Each length is depends on the type of data pp: Destination of Program/Memory No.
MODE Completed [FO,42,3n,3D,21,F7]
Request [FO,42,3n,3D,12,F7] Error [F0,42,3n,3D,22,F7]
DATA [F0,42,3n,3D,42,rnm,ll,cc,F7] *: EQ memory write and Effect memory write are
mm: MODE followings are in Hex. effective only in each memory page.
00:MISC, 01:Ex.Bus I/O, 02:MIDI,
03:Program, 04:Recall, 05:Save,
PARAMETER CHANGE
06:I/S/P, 07:EQ, 08:BUS, 09:INPUT, [F0,42,3n,3D,41,00,ff,nn,ll,mm,F7]
0A:AUX Send, 0B:Eff. Send, This message is not on handshake manner.
0C:PAN, 0D:EFF1, OE:EFF2.OF:,Bus Master, 168RC will send this when a parameter is
10:SND Master, ll:Meter, 12: Cycle edited by front panel. And When the system
11: Selected line receive this, ceirtain parameter will be
Line No. of the MODE. Though, a LCD changed.
display has only two line to edit, a ff: function number ( Hex ]
MODE can have roore lines. 00*. Fader, 10*.Solo, 20‘.Mute, 30*.Sel Key,
Ex. On AUX Snd MODE. 40: Edit SW, 50:Edit Volume
01: AUXl chl-8, 02:AUX1 ch9-16, 03:AUX2 nn: No. of controller
chl-8, 04;AUX2 ch9-16 ' For Fader,Solo,Mute and SelKey, this means
Ex. EFFl MODE ch. No.. For Edit SW and Edit Volune, this
01: EFFl Out, 02:first line of a Effect indicate one of eight physical nobs from
type, 03:Second line of a Effect type left. Value of zero is reserved.
cc: Selected channel 11: LSB 7bit
01-10: chl-chl6 ram: MSB 7bit
Only for EFFl or EFF2 mode. This is used Ex.
for one of 32 Effect type. F0,42,3n,3D,41,00,00,01,00,7F,F7
Ex. 00:Reverb-hall, 10:Pitch Shidt Mod. Chi Fader Max
Change req. [FO,42,3n,3D,4E,mm,11,cc,F7] FO,42,3n,3D,41,00,20,04,00,7F,F7
GLOBAL DATA DUMP
A fourth edit SW is on. A Parameter that
should be edited is depend on where the
Request [FO,42,3n,3D,OE,00,F7] system is. Mode, page and line is defined
Reply [FO,42,3n,3D,51,00,DATA *,............ F7] by MODE Change message.
DATA *: SEE ATTACHED CHARTS. METER DATA
ALL PROGRAM DATA DUMP
[FO,42,3n,3D,47,00,DATA,F7]
No handshake. Only the data is transmit-
Request [FO,42,3n,3D,1C,00,F7] ted. the data is absolute. No peak holded.
Reply [FO,42,3n,3D,4C,00,DATA *,........... F7]
DATA *: SEE ATTACHED CHARTS. DATA: 32byte. 7bit for each.
CURRENT PROGRAM DATA DUMP
7F:Full bit (Max) 19:-48dB
ILSB = 0.46875dB
Request [FO,42,3n,3D,10,00,F7] Order of DATA is
Reply [FO,42,3n,3D,40,00,DATA *,.......... . F7j ML,MR,Chl-Chl6,Gl-G8,SL,SR,Al,A2,El,E2
DATA *: SEE ATTACHED CHARTS.
ALL EQ MEMORY DATA DUMP
PROGRAM PARAMETER MAP DUMP
Request [FO,42,3n,3D,35,00,F7]
Request [FO,42,3n,3D,1C,01,F7) Data [F0,42,3n,3D,6A,00,DATA *,F7]
Reply [FO,42,3n,3D,4C,01,DATA *,............ F7] DATA *: SEE ATTACHED CHARTS.
DATA *: SEE ATTACHED CHARTS.
CURRENT EQ DATA DUMP
PROGRAM CHANGE MAP REQUEST
Reque'st [FO, 42,3n, 3D, 07,00, F7 ]
Request [FO,42,3n,3D,10,01,F7] Data [FO,42,3n,3D,5D,00,DATA *,F7]
Reply [F0,42,3n,3D,40,01,DATA *,........... F7] DATA *:SEE ATTACHED CHARTS.
DATA *: SEE ATTACHED CHARTS.
ALL EFFECT MEMORY DATA DUMP
System exclusive handshake messages
A receiver will reply these message according to recog-
Request [FO,42,3n,3D,1C,02,F7] nized message. When first four byte from FO to 3D is
Reply [F0,42,3n,3D,4C,02,DATA *,........... F7] wrong, a receiver will not reply any message.
DATA *:SEE ATTACHED CHARTS. MIDI IN DATA FORMAT ERROR
CURRENT EFFECT DATA DUMP (In Memory)
[F0,42,3n,3D,26,F7]
This means the length of the massege is illegal.
Request [FO,42,3n,3D,10,02,F7] DATA LOAD COMPLETED ( ACK )
Reply [FO,42,3n,3D,40,02,DATA *............ F7] [F0,42,3n,3D,23,F7J
DATA *:SEE ATTACHED CHARTS This means the massage is recognized and process is
ALL PROGRAM NAME DUMP
completed.
DATA LOAD ERROR ( NAK )
Request [FO,42,3n,3D,1C,03,F7] [F0,42,3n,3D,24,F7]
Reply [F0,42,3n,3D,4C,03,DATA *............ F7] This means the massage includes an unknow command or
DATA *: SEE ATTACHED CHARTS. value. Or process is incompleted because of setup or
hardware error.
81