Chapter 6. reference – KORG Soundlink DRS REcording Console 168RC User Manual
Page 89
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chapters. Reference
Chapter 6. Reference
1.
This chapter contains various cormection examples for systems, specifications, error messages,
and block diagrams etc.
System connection examples
A recording sysfem using one odot
O
Use an ADAT-OPTICAL cable to connect the 168RC's adat OPTICAL IN A to the adat's Digital
OUTPUT. In the same way, cormect the 168RC's adat OPTICAL OUT A to the adat's Digital
INPUT.
Also, cormect appropriate input sources to INPUT A~D and LINE IN E~H, and connect a
monitor system and a master recorder etc. as necessary.
0 Press the adat's DIGITAL INPUT switch to connect the adat inputs to the 168RC's group buses.
O Set the 168RC's MISC mode CLK Source to "INTERNAL."
If you are using an adat XT, set the adat XT's C LOCK SOURCE to "DIG 48K".
O In INPUT mode, assign the signals which are input from the 168RC's adat OPTICAL IN A to
appropriate channels of "DIG-A1"~"DIG-A8"
Also in INPUT mode, assign the signals which are input from INPUT A~D and LINE IN E~H
to appropriate channels of "ANA-A"~"ANA-EI".
adat
Master recorder (DAT)
82