Eq mode, Hz db, Mf о mq – KORG Soundlink DRS REcording Console 168RC User Manual
Page 43: Hz da, Eq in "off, on, Pad "0,6,12db, Hf "0.8 khz, Hg "-12...+12db, Olekii, Eq mode channel eq (ch eq)
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chapters. Parameters
6.
EQ mode
Channel EQ (Ch EQ)
EQ In
Ш
if
ti]l!l
Pad
О g l O ^ О
Hz dB
MF
О
MQ
ЯЯМ B№M ШШ
Hz dB
9 о
Hz da
OlEKII
Here you can adjust the EQ for each channel 1~12. Use the [SEE] keys to select a channel.
EQ In
"OFF, ON"
The EQ will be active with a setting of ON. The EQ will be bypassed with a setting of OFE.
Pad
"0,6,12dB"
Use this to lower the input level of the EQ. With a setting of "0" the level will not change. A setting
of "6" lowers the level 6 dB, and "12" lowers the level 12 dB.
LF
Specify the cutoff frequency of the low EQ (shelving type).
LG
Specify the gain of the low EQ (shelving type).
MF
Specify the center frequency of the mid EQ (parametric type).
MG
Specify the gain of the mid EQ.
MQ
Specify the Q of the mid EQ. Higher values will narrow the frequency area that is affected by the
mid EQ.
HF
"0.8... 16 kHz"
Specify the cutoff frequency of the high EQ (shelving type).
HG
"-12...+12dB"
Specify the gain of the high EQ (shelving type).
"32
HZ...1
kHz"
"-12...+12dB"
"200 Hz... 10 kHz"
"-12...+12dB"
"
0
.
6
...
8
.
0
"
36
dB
MidEQ
Fc=400Hz
Gain=+12.0dB
Q=0.6~8.0
[MEM]
This accesses the EQ Memory page.
HF