KORG Soundlink DRS REcording Console 168RC - Manual (Page 46)

8. INPUT mode
8. INPUT mode
The contents of this mode can also be set from I/S/P mode. If you wish to view the settings of all
channels simultaneously as you make settings, use this mode. If you wish to view the other set­
tings of the channel as you make settings, use I/S/P mode.
Input Select (Input Sel.)
DIG-Al
l:|_________
5: DIG-A1
9:DIG-A1
13:DIG-A1
2 :
6:DIG-A1
10:DIG-A1
14:DIG-A1
3:|
7:DIG-A1
ll:DIG-Al
15:DIG-A1
1...16 "D1G-A1...DIG-A8, D1G-B1...DIG-B8, ANA-A...ANA-H"
Select the input source for each channel. You can choose from the following 24 audio inputs.
"DIG-A1...DIG-A8" of adat OPTICAL IN A
"DIG-B1...DIG-B8" of adat OPTICAL IN B
"ANA-A...ANA-H" of INPUT A~D and LINE IN E~H
Phase
$
t PGM Uhl >Pha:
iGl 2^ 3^ 4^ 5^1 6^ 7^ 8^
9 Q 10 ca 11 ca 12 Qi 13 14 15 Ql 16 Ql
1...16 "o (phase normal), ^ (phase inverted)"
This inverts the phase of the input for each channel. If an audio device with a connector that
inverts the hot and cold connections is input in stereo, the spatial image may be indistinct, or some
portions of the sound may be canceled. In such cases, the phase switch can be used to invert the
phase. The phase is inverted when the " ^ " symbol is displayed.
39