Phaser-tremolo, 28; phaser-tremolo – KORG Soundlink DRS REcording Console 168RC User Manual
Page 78
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
28: Phaser-Tremolo
28: Phaser-Tremolo
This effect links the LFO of a phaser and tremolo. The phaser modulation and the tremolo modu
lation will be synchronized, producing a pleasant modulation effect. This is especially suitable for
electric piano, etc.
Output
LEVL
LFO FREQ
0.02...15.0HZ
Set the LFO speed.
Phaser MNAL
0...100
Set the frequency at which the effect will be applied.
Phaser DPTH
0...100
Set the LFO modulation depth.
Phaser RESO
-100...+100
Set the amount of resonance.
Phaser W/D
-Wet,-98...-2,
Dry,+2...+98,Wet
Set the balance between the phaser effect sound and the
direct sound.
Set the balance between the phaser output and the direct
sound. With settings of -Wet—2, the effect sound will be
output with inverted phase.
DIFF
-180...+180
Set the LFO phase difference between the tremolo and
phaser.
Tremolo SHPE
-100...+100deg
Specify how greatly the shape of the tremolo LFO will be
modified. p.51 LFO SHAP
Tremolo DPTH
0...100
Set the depth of LFO modulation for tremolo.
Tremolo W/D
Dry, 1...9, Wet
Set the balance between the effect sound and the direct
sound.
This sets the balance between the resulting output of the
phaser + tremolo and the direct sound.
Output PAN
L50...L01,CNT,
R01...R50
Set the pan position of the output.
Output LEVL
0...100
Set the output level.
71