Eq-delay – KORG Soundlink DRS REcording Console 168RC User Manual
Page 73
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chapter 4. Effects
23: EQ-Delay
In this effect, the sound passes through a 2-band parametric equalizer and then a delay.
Bandi FREQ
100HZ...10.0 kHz
Set the center frequency of band 1.
Bandi Q
0.6...8.0
Set the width of the frequency range for band 1. Higher
settings of this value will make the band narrower and
sharper.
Bandi GAIN
-12.0...+12.0dB
Set the gain of band 1.
Band2 FREQ
100Hz...10.0kHz
Set the center frequency of band
2 .
Band2Q
0.6...8.0
Set the width of the frequency range for band 2.
I®’ Bandl Q
Band2GAlN
-12...+12dB
Set the gain of band 2.
Delay TIME
0...680 mS
Set the delay time.
Delay FBAK
-100...+100
Set the amount of feedback.
Delay DAMP
0
.. .
100
%
Set the amount of high frequency attenuation. The tone of
the delayed sound will become darker each time it feeds
back.
Delay W/D
Dry, 1...99, Wet
Set the balance between the effect sound and the direct
sound.
Out PAN
L50...L01,CNT,
R01...R50
Set the pan position of the output.
66