Reverb wet plate, Reverb dry plate, 05; reverb dry plate – KORG Soundlink DRS REcording Console 168RC User Manual
Page 55
Attention! The text in this document has been recognized automatically. To view the original document, you can use the "Original mode".
Chapter 4. Effects
04: Reverb Wet Plate
This is a simulation of a high-density plate reverb. It produces warm reverberation.
05: Reverb Dry Plate
This is a simulation of a light plate reverb. It produces a dry-sounding reverberation.
Output
Output
W/D
LEVL
In o-
Pre Delay THRU
Pre EQ
HIGH
——
-<Z
Pre Delay
TIME
Reverb
-0^
-0
------------- °
Output
Output
W/D
LEVL
Rev. TIME
0.1...10.0S
Set the reverb time.
DAMP
0...1007o
Set the high frequency attenuation.
Pre Delay TIME
0...200mS
Set the delay time after the direct sound.
US’ p.46
Pre Delay THRU
0...100%
Set the amount of the undelayed sound that will be mixed.
US’ p.46
Pre EQ TRIM
0...100
Set the input level to the equalizer.
Pre EQ LOW
-12.0...+12.0dB
Set the gain of the low frequency equalizer.
Pre EQ HIGH
-12.0...+12.0dB
Set the gain of the high frequency equalizer.
OufputW/D
Dry, 1...99,Wét
Set the balance between the effect processed sound and
the direct sound.
Output LEVL
0...100
Set the output level.
48