Futaba 4GRS - Manual (Page 100)

Connect the communication
port of both T4GRS with the
optional DSC cord.
Communication port
DSC cord for T4PK (option)
(MDL TRANS screen)
Press
(DISP MENU screen)
Press
Select
"MDL TRANS"
100
Fu
nc
tio
n
Data Transfer "MDL TRANS"
This function copies the model memory data of one T4GRS to another T4GRS. Con-
nect the communication port of both T4GRS together with the optional DSC cord for
T4PK. Use this function with the T4GRS power switch set to the display side.
Note:
If the T4GRS battery voltage drops, the display switches to low battery display.
Therefore, use this function when there is ample battery capacity remaining.
Note: Since the receiving side writes the new contents of the currently selected model
memory, always check the model number before executing this function.
Data is not interchangeable with another type of transmitter.
Display "MDL TRANS" screen by with the T4GRS power switch at the display setting
using following method:
(Preparation)
- Connect the communication port of both transmitters together
with the optional DSC cord for T4PK.
1
Set the power switch of both transmitters to the display (DISP)
setting.
Use the (JOG) button and (+) button to display the "MDL-
TRN" at both transmitter.
Using the Data Transfer function
Data Transfer "MDL TRANS"