Neutral adjuster (throttle stick), Fu nc tio n – Futaba 4GRS User Manual

Page 114

Advertising
background image

5:5

7:3

Neutral Adjuster

(Throttle stick)

114

Fu

nc

tio

n

Adjuster "ADJUSTER"

(Preparation)
On the ADJUSTER screen, select the setting item "THROT-
TLE" using the (JOG) button, and press the (JOG) button.
Throttle adjustment will not be made if it has been converted
to ratchet operation.

It is necessary to return to a self neutral.

Throttle adjustment

Key

CANCEL

ADJUSTER

THROTTLE

N5 5

Key

CANCEL

ADJUSTER

THROTTLE

N5 5

N7 3

Key

CANCEL

ADJUSTER

THROTTLE

N5 5

N7 3
BRK

FWD

Key

CANCEL

ADJUSTER

THROTTLE

N5 5

N7 3
BRK

FWD

fig-1

fig-3

fig-2

fig-4

1

(Throttle 5:5

neutral adjustment )

Neutral adjuster is set to 5:5 by the Neutral Adjuster switch.

In the 5:5 neutral setup screen (fig-1) state, pull the stick
back slightly then allow to return to neutral and press the
(JOG) button whilst ensuring the stick is not touched.

2

(Throttle 7:3

neutral adjustment )

Neutral adjuster is set to 7:3 by the Neutral Adjuster switch

.

In the 7:3 neutral setup screen (fig-2) state, pull the stick
back slightly then allow to return to neutral and press the
(JOG) button whilst ensuring the stick is not touched.
Note that both the 5:5 and 7:3 neutral adjustment procedures
have to be completed as part of the set-up process. Once
complete the required option should be selected.

3

(Throttle throw adjustment)

In the throw setup screen state (fig-3), gently move the stick
fully to the brake side and the forward side and when button
mark (fig-4) is displayed, pressing the (JOG) button.
Internal check is performed automatically. When each adjust-
ment point is within a fixed range, correction is performed
and “COMPLETE!” (fig-5) is displayed.
If an adjustment point is not within a fixed range, correction
is not performed and the correction data is not updated.
When button mark is not displayed even though correction
was performed again, please contact a Futaba Radio Control
Customer Center.

4

When completed, return to the ADJUSTER screen by press-

ing the (JOG) button.

5

Next, move the cursor to [RT] using the (JOG) button, and press

the (JOG) button.

Key

CANCEL

ADJUSTER

THROTTLE

N5 5

N7 3
BRK

FWD

COMPLETE!

fig-5

Advertising