Futaba 4GRS - Manual (Page 111)

Buzzer tone (BUZZER)
OFF, 1~100
Initial value: 85
Voltage display
When BATT is set to dry cell
use DRY4 or LiFe2/NiMH5,
the voltage display of the
HOME screen changes.
CONTRA
LHT-TM
BK-LHT
SYSTEM
[ RT ]
LHT-PW
BATT
OPE-TM
BUZZER
MENU
TH-STK
DISP
OFF
TLMTR
ENG
5 5
0
ALL
10s
15
DRY4
65
DRY4 LiFe2, NiMH5
The power off forgotten alarm
(OPE-TM)
10m, OFF
CONTRA
LHT-TM
BK-LHT
SYSTEM
[ RT ]
LHT-PW
BATT
OPE-TM
BUZZER
MENU
TH-STK
DISP TLMTR
ENG
5 5
0
ALL
10s
15
DRY4
65
OFF
111
Fu
nc
tio
n
Note: If used with the incorrect setting, a normal low battery alarm will not be gen-
erated and the system may stop before the battery alarm is generated. The usage
time may also become extremely short.
"LiFe2" :Futaba LiFe type battery (FT2F1700BV2 / 2100BV2)
"NiMH5" :Futaba MiMH type battery (HT5F1800B)
"DRY4" :Dry cell battery (alkaline battery recommended) 4 batteries
System Functions "SYSTEM"
When completed, return to the menu screen
by pressing the (JOG) button.
(Adjusting the buzzer tone)
Select the setting item "BUZZER" using the
(JOG) button, and use the (+) and (-) buttons
to adjust the tone.
- Decide by referring to the tone at adjustment.
When completed, return to the menu screen
by pressing the (JOG) button.
(Changing the Alarm Setting if Tx is left switched ON)
Select the setting item "OPE-TM" using the
(JOG) button, and use the (+) and (-) buttons to
select the alarm setting if Tx is left switched ON
mode.
"10m" :If an operation is not performed within 10 min-
utes while the power is on, an audible alarm
sounds.
"OFF" :Alarm setting if Tx is left switched ON is OFF
When completed, return to the menu screen by pressing the
(JOG) button.