Futaba 4GRS - Manual (Page 27)

27
B
ef
or
e Usi
ng
High side
Brake (reverse) side
Stroke can be reduced mechanically.
Stick stroke adjustment
1
Make this adjustment by turning the adjusting screw
above the stick with a Phillips screwdriver.
• When the adjusting screw is turned counter clockwise, the
stroke is reduced.
Mechanical Throttle Stick Stroke Adjustment
Make this adjustment when you want to reduce the throttle stick range at the full
power or brake/reverse positions.
2
On the MENU2 screen, select the
setting item "ADJUSTER" using the
(JOG) button, and pressing the (JOG)
button.
3
(Selection of THROTTLE)
Move the cursor to "THROTTLE"
using the (JOG) button up or down
function, and pressing the (JOG)
button.
HOME MENU1
Push
ADJUSTER
＊STEERING
[ RT ]
＊THROTTLE
MENU2
Select
ADJUSTER Select
THROTTLE
Key
CANCEL
ADJUSTER
THROTTLE
N5 5
Key
CANCEL
ADJUSTER
THROTTLE
N5 5
N7 3
Key
CANCEL
ADJUSTER
THROTTLE
N5 5
N7 3
BRK
FWD
Key
CANCEL
ADJUSTER
THROTTLE
N5 5
N7 3
BRK
FWD
fig-1
fig-3
fig-2
fig-4
4
(Throttle 5:5 neutral adjustment )
Neutral adjuster is set to 5:5 the Neutral Adjuster switch (see
next page)
. In the 5:5 neutral setup screen (fig-1) state, pull the
stick back slightly then allow to return to neutral and press the
(JOG) button whilst ensuring the stick is not touched.
5
(Throttle 7:3 neutral adjustment )
Neutral adjuster is set to 7:3 by the Neutral Adjuster switch (see
next page)
. In the 7:3 neutral setup screen (fig-2) state, pull the
stick back slightly then allow to return to neutral and press the
(JOG) button whilst ensuring the stick is not touched.
Note that both the 5:5 and 7:3 neutral adjustment procedures
have to be completed as part of the set-up process. Once com-
plete the required option should be selected.
6
(Throttle throw adjustment)
In the throw setup screen state (fig-3), gently move the stick fully
to the brake /reverse and full power positions and when button
Push