Model reset " reset – Futaba 4GRS User Manual
Page 50
Move the cursor to "RESET"
with the (JOG) button.
"COMPLETE!" is displayed.
The set RX type and T-FHSS receiver ID remain even if the model is reset. The
same receiver can be used as is without re-linking
50
Fu
nc
tio
n
Model "MODEL"
Using the model reset function
Model Reset "RESET"
This function resets and initializes the contents of the currently selected model data.
However, the adjuster function (ADJUSTER), system setting (SYSTEM), and type of
receiver mode (TYPE) are not initialized.
- Display the MODEL screen.
1
(Selection of model reset)
Move the cursor to "RESET" using the
(JOG) button up or down operation.
2
(Model reset execution)
Press the (JOG) button for about 1 second. A
beeping sound is generated and the model is
selected.
-Resetting is complete when "COMPLETE!" is displayed on
the screen.
3
When completed, move the cursor to [RT] by
the (JOG) button, and return to the MENU1
screen by pressing the (JOG) button.