Futaba 4GRS - Manual (Page 51)

Move the cursor to the char-
acter you want to change by
(+) or (-) button.
Select the character by
(JOG) button.
Move the cursor to "RE-
SET" by the (JOG) button
up or down operation.
[ RT ]
Model name
User name
Character
Press
cursor position [RT]
Press
Press
(MDL NAME screen)
Press
Select
"MDL NAME"
(HOME screen)
(MENU 2 screen) (MENU 1 screen)
When (JOG) button left or right operation is performed from both the left
and right ends of the character list, the page (all 3 pages) is changed
and the character set is selected.
(KATAKANA of the 3rd page is displayed when "KANA" is set by the
"SYSTEM" function "MENU".)
51
Fu
nc
tio
n
Model Name "MOE NAME"
Setting the model name and user name
1
(Move the cursor to the character you want to change.)
Select the model name character you want to set or change
by moving the cursor using the (+) or (-) button. The selected
character blinks.
2
(Selecting the character to be used)
Select the character to be used from the character list at the
lower section of the screen using the (JOG) button up, down,
left, or right operation. The selected character blinks. After
selecting the character to be used, press the (JOG) button.
The character is entered and the model name or user name
character row moves to the right. To clear the model or user
name move the cursor to "RESET" using the (JOG) button
up, down, left, or right operation, and press the button for
about 1 second. A beeping sound is generated and the mod-
el name is initialized to the factory setting.
3
When completed, move the cursor to [RT] using the (JOG)
button, and return to the MENU1 screen by pressing the
(JOG) button.
Model Name "MDL NAME"
This function allows you to assign a ten character name to each model memory and
user name.
Display to "MDL NAME" screen by the following method: