Futaba 4GRS - Manual (Page 78)

Press
Press
Press
(HOME screen)
(MENU 1 screen) (PROG MIX screen) (MENU 2 screen)
Press Select
"PROG MIX "
78
Fu
nc
tio
n
Programmable Mix "PROG MIX"
This function allows you to apply mixing between the steering, throttle, channel 3 and
channel 4.
-When the steering or throttle channel is the master channel (channel that applies mix-
ing), trim data can be added. (Trim mode)
- The mixing mode selection. (Master mixing mode)
Relating function
steering :EPA, STR EXP, D/R, SPEED, 4WS
throttle :EPA, THR EXP, ATL, ABS, SPEED, BRAKE MIX, NT-BRK, ESC MIX, TH ACCEL
CH3
:EPA,BRAKE MIX,4WS
CH4 :EPA,BRAKE MIX,ESC MIX
Additional Functions
The movement of the slave channel will be in proportion to the movement of the master
channel.
Movement of the slave channel side
Programmable Mix "PROG MIX" (All channels)
Function SW
PROGMIX
Program mixing adjustment
(Preparation)
- When "PROG MIX" is turned ON and OFF by switch, set
the switch by select switch dial function.
1
(Mixing function ON/OFF)
Select the setting item "MODE" using the (JOG) button up or
down operation. Use the (+) or (-) and set the function to the
"ON" or "OFF" state.
“INH” : Function OFF
“ON” : Function ON. When the switch is OFF, “OFF” is displayed.
Display "PROG MIX" screen by the following method:
Function ON/OFF (MODE)
INH,ON(OFF)
Setup items
MODE : Function ON/OFF
LEFT :
Mixing rate (Left side)
RGHT : Mixing rate (Right side)
MST : Master channel
SLV : Slave channel
MXMD : Mix mode
TRIM
: Trim mode
Select button
- Select with the (+) or (-) but-
tons.