KERN & SOHN CCS Version 2.0 - Manual (Page 23)

CFS/CCS-BA-e-1220 23
 Tolerance control,
see chap. 12
Call up menu
Select memory locations
Switch-over balance,
see chap. 9.3
At numeric input digit
selection to the left
Input of the average piece
weight by weighing, see
chap. 11.1
Function /parameter
selection
Numeric input of the
average piece weight see
chapter 11.2
Switch-over weighing unit
Taring key Confirm
Zeroing key
At numeric input digit
selection to the right
Back to menu
or in weighting mode