KERN & SOHN CCS Version 2.0 - Manual (Page 53)

CFS/CCS-BA-e-1220 53
CFS 50K-3 models:
 Press
, tolerance control is started. The  symbol over appears.
 Determine the average piece weight (see chap. 11.1 or 11.2), place the weighing
goods and check using the tolerance mark , if the number of the placed pieces
is under, within or above the specified tolerance.
Display of tolerance mark , if weighing goods are under the specified tolerance
Display of tolerance mark , if weighing goods within the specified tolerance
Display of tolerance mark , if weighing goods above the specified tolerance: