KERN & SOHN CCS Version 2.0 - Manual (Page 73)

CFS/CCS-BA-e-1220 73
 Press , „0 Auto“ is displayed
 Zero setting range
Load range where the display after switching-on the balance is
set to zero
 Press , the currently set zero setting range is displayed.
With select desired setting (0 %, 2 %, 5 %, 10%, 20%,
30%, 40%, 50 %) and confirm.

(example)
 Press , „0 mAnL“ is displayed
 Zero setting range
Load range where the display is set to zero by pressing .
 Press , the currently set auto-zero range is displayed.
With select desired setting (0 %, 2 %, 4 %, 10 %, 50 %,
100 %) and confirm with .

(example)
 Press , „Pin“ is displayed
Password input for menu block „ “
 Press
, will be shown. Use the numeric
keyboard to enter the desired code and acknowledge with
.


 is displayed, request to repeat the password
input.
Enter code anew and press to acknowledge. If entry was
successful, is displayed, if false,
appears. In this case repeat the code input.
