KERN & SOHN CCS Version 2.0 - Manual (Page 49)

CFS/CCS-BA-e-1220 49
CFS 3K-5, CFS 6K0.1, CFS 15K0.2, CFS 30K0.5 models:
 Press , tolerance control is started. The  symbol over appears.
 Place the weighing goods and with help of the tolerance mark  check if the net
weight of the weighed goods is under, within or over the specified tolerance.
Display of tolerance mark , if weighing goods are under the specified tolerance:
Display of tolerance mark , if weighing goods within the specified tolerance:
Display of tolerance mark , if weighing goods above the specified tolerance:
The information if the goods to be weighed are within the tolerance limits, can
additionally be given by an acoustic signal (menu item „
„ see chap. 13.2)