KERN & SOHN CCS Version 2.0 - Manual (Page 26)

26 CFS/CCS-BA-e-1220
 If necessary, at balance zero display using
select the weighing unit [kg or lb], which shall be
used for adjustment. The appeared [] displays the
current weighing unit.
Acknowledge with .
 Ensure that there are no objects on the weighing
pan. After successful standstill control press the
button.
 The weight value of the adjustment weight appears.
Acknowledge with .
 Place the adjusting weight carefully in the centre of
the weighing plate and press to confirm.
or
 Enter the desired value of the adjustment weight
using numeric keyboard and acknowledge with
.
In order to achieve high-quality weighing results in
the sense of the measuring technology, it is
recommended to select the nominal value as high
as possible.
We recommend 80 % max.
 Place the adjusting weight carefully in the centre of
the weighing plate and press to confirm.
 After the adjustment the balance will carry out a
self-test. Remove adjusting weight during selftest,
balance will return into weighing mode
automatically.
In case of an adjustment error or incorrect adjusting
weight the display will show an error message
(
), repeat adjustment process.