KERN & SOHN CCS Version 2.0 - Manual (Page 37)

CFS/CCS-BA-e-1220 37
10 Totalization
The balance can totalize weight values or piece quantities.
When using in the counting system, no matter, if the weighed goods are on the
reference or on the bulk material balance.
Preparing:
 When using as counting system select using the balance, on which will be
totalized. The appeared [] displays the current balance.
 When totalizing in counting mode set the average piece weight.
(see chap. 10.1 or 10.2)
 If necessary, tare the empty balance container.
10.1 Manual totalizing
10.1.1 Manual totalizing CFS 3K-5, CFS 6K0.1, CFS 15K0.2, CFS 30K0.5
models
With this function the individual weighing values are added into the summation
memory by pressing and edited, when an optional printer is connected.
Menu settings:
„F1 off“  „ACC“  „ON“ and „F2 Prt“  „P mode“  „Print“  „Au OFF“
(see chap. 13.2)
When using as counting system there can be totalized on the reference as
well as on the bulk material balance.
Before the totalizing process select the active balance, see chap. 9.3.