PRG Controlling VARI-LITE Equipment Using DMX 512 - Manual (Page 69)

S YSTEM : H ANGING
0 2. 3 0 0 4. 0 3 00 . 5 4 61
3
Series 200 Hanging Methods
Series 200 Two-Point Hang (Standard)
A two-point hang is the standard hanging method for Series 200 luminaires.
VL2C Luminaire
VL4 Luminaire
Series 200 Three-Point Hang
A three-point hang is required when the trusses move or tilt in any way during the show. This method
of hanging prevents the luminaires from slipping or twisting on the truss and thereby altering their
focus. In some cases a cross-brace and a third truss hook can be used, but in most cases an adjustable
truss coupling plate will be required.
VL2HANG
VL4HANG
8.49 in
216 mm
Requires use of right-angle
(90 degree) truss hook here