Toa C-RM700 - Manual (Page 20)

20
6.2.3. Viewing sequential displays
The outputs of all cameras connected to the switcher can be displayed on the monitor in sequential order at
viewing intervals preset at the switcher. The outputs of the cameras not connected cannot be displayed. For
details, refer to the instruction manual included with the switcher.
[Sequential full-screen viewing]
Press the Sequence key.
The images for Cameras 1-16 are displayed
in sequential order.
Note that if the Tour Sequence function has
been set, the camera images will be switched
in the order of the specified reproduction
number. (Refer to
p. 45 , "Tour sequence.")
Note: In this example, Camera No. 2 is not
displayed on the monitor because it is
not connected.
[Sequential 4-segment split-screen viewing]
1. Press the Sequential 4-segment split-
screen key.
4 groups of camera images are displayed
in 4-segment split screen automatically
being toggled in sequence.
2. Pressing the same key again stops the
display sequence at the currently displayed
screen.
S E Q U E N C E
LCD screen
SEQUENCE
4 - S E G M E N T
LCD screen
Camera No. 1
Camera name
Camera No. 16
Camera name
Camera No. 3
Camera name
Monitor screen
DDDD CCCC
BBBB AAAA
HHHH GGGG
FFFF EEEE
PPPP OOOO
NNNN MMMM
LLLL KKKK
JJJJ I I I I
Camera name
Monitor screen
Group1 Group2
Group3 Group4