Toa C-RM700 - Manual (Page 23)

23
6.2.7. Using the abbreviated numbers
By merely entering the programmed abbreviated number with the numeric keypad followed by the SET key,
the camera image (camera number and position number) programmed can be displayed on the monitor.
(Refer to
p. 44 , "Abbreviation.")
1. Enter the abbreviated number using the
numeric keypad.
2. Press the SET key.
The programmed camera image (position) will
be displayed on the full screen. Also, when the
controllable camera is designated, the Control
key lights, permitting camera operations with
the joystick.
2 5 S E T
0 0 1
LCD screen
Displays the camera number
programmed under the
abbreviated number.
SET
CONTROL
Lights
CONTROL
Extinguishes
5 2
(Example)
6.2.6. Using the function keys
By simply pressing a Function key (F1-F8), the camera image (camera number and position number)
programmed into the key can be displayed on the monitor.(Refer to
p. 42 , "Function.")
Press a Function key (any one of F1-F8).
The corresponding camera image (camera number and position number) is displayed on the full screen of the
monitor.
F8 F7 F6 F5 F4 F3 F2 F1 CONTROL
Lights
F 3 F U N C T I O N K E Y
0 1
LCD screen
Displays the camera number
programmed into the Function key.
Function key