Toa C-RM700 - Manual (Page 47)

47
8. CONNECTIONS
8.1. Connection to Combination Cameras
Connect the Combination camera's control cable to the unit's Camera Control terminal, making sure to match
their polarities.
Remote controller
C-RM700
Camera control terminals
GND
Shielded twisted-pair cable
To video input
Combination camera
To 24 V AC
7.4.26. Password
Sets the password required when opening the menu.
1. Press the Menu key while holding down the Alarm reset key.
The password setting screen will appear.
2. Enter the password (4 digits) with the numeric keypad, and confirm the password with the SET key.
The display will return to the normal screen.
P A S S W O R D
7.5. Adjusting the Joystick Position
Adjust the joystick's center position.
1. Turn off the remote controller's power.
2. Turn on the power while holding down both the Camera and Auto keys.
The unit judges the current joystick position as the center position.
Note: Do not turn on the power while tilting the joystick.