Toa C-RM700 - Manual (Page 24)

24
6.3. Alarm Hold and Reset
The Alarm can be held or reset when "1 Front" has been selected in the "Alarm Hold" setting, and is not
activated when "2. ALWAYS" has been selected. (Refer to
p. 41 , "Alarm hold.")
6.3.1. Holding the alarm
Press the Alarm hold key.
The Alarm hold key will flash.
6.3.3. Resetting the alarm
Press the Alarm reset key.
The Alarm reset key will extinguish, resetting the alarm state.
Note
The alarm cannot be reset when "2. LEVEL" has been selected in the Alarm Signal setting. The state of alarm
continues as long as an alarm signal input is received. (Refer to
p. 40 , "Alarm signal.")
6.3.2. Displaying alarm-activated camera images
Press the Alarm hold key.
The Alarm hold key will extinguish, displaying the alerted camera image on the monitor in full screen format.
[When an alarm signal is received during Alarm Hold]
The Alarm reset key flashes while the "AL HOLD" indication is displayed on the monitor.
A L A R M H O L D
LCD screen
ALARM
HOLD RESET
ALARM
HOLD RESET
Flashes
Monitor screen
ALARM
ALARM
HOLD RESET
ALARM
HOLD RESET
Extinguishes
Monitor screen
04 03
02 01
ALARM
HOLD RESET
ALARM
HOLD RESET
Extinguishes
AL HOLD
03
02
04
01
Monitor screen
(4-segment split-screen display)
Flashes
ALARM
HOLD RESET
ALARM
HOLD RESET